
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 130 to 150 mm on the machine — no shims, no part change.
The SDAJ32X150-20SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the extend position anywhere between 130 and 150 mm directly on the machine, eliminating the need for shims or part swaps.
This configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 piston rod thread. The 150 mm stroke exceeds the 130 mm standard maximum for a 32 mm bore, making this a made-to-order non-standard unit. It retains the short riveted body design that saves axial mounting depth, and relies on a fixed NBR bumper at each end to decelerate the stroke.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 150 mm |
| Adjustable range | 130 – 150 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 130-150mm clamping extension during trial positioning on a machining fixture, ensuring the male M10x1.25 rod seats perfectly without part changes.
When sizing this actuator, evaluate your force requirements against its neighbors.
Select this specific unit if your application requires on-site stroke tuning between 130 and 150 mm. Confirm your setup requires the male M10x1.25 rod thread, the PT1/8 air port, and the -S magnet for position sensing. Remember that a plain cylinder does not hold a load if air pressure is lost or the valve is centered; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 82 kgf at 1.0 MPa. Adjusting the external stop does not alter these force values.
The M10x1.25 R screw shortens the extend stroke by up to 20mm, allowing you to set the end position anywhere between 130mm and 150mm. The included -S magnet enables position detection using AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.