
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X160-50B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 160 mm on the machine — no shims, no part change.
The SDAJ32X160-50B is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjuster screw that dials the extend stop from 110 to 160 mm directly on your equipment. This specific 160 mm stroke exceeds the 130 mm standard maximum for a 32 mm bore, making it a non-standard, made-to-order unit.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. This SKU includes a male M10x1.25 piston rod thread (option B) and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X160-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 160 mm |
| Adjustable range | 110 – 160 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 110 and 160 mm to set precise cutting or clamping depths on bespoke fixtures without machining new spacers.
Use the male M10x1.25 rod end and the 50 mm external adjuster to iterate actuator endpoints quickly during physical testing and process validation.
When sizing this 32 mm bore, evaluate your force requirements against neighbouring options.
Choose this adjusted-stop variant if your application requires frequent changeovers or trial positioning between 110 and 160 mm. Confirm your requirements for the PT1/8 port, male M10x1.25 rod thread, and the 50 mm adjustment window. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M10x1.25 R screw mechanically shortens the extend stroke by up to 50 mm, allowing endpoints between 110 and 160 mm without changing parts. This specific SKU lacks the -S magnet option, so it cannot accept reed or electronic switches; choose the -S variant if sensing is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.