verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke25 mm
  • Adjustable range5–25 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$41.84 $49.34Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H

The AirTAC SDAJ32X25-20H is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can shorten the extend stroke on-site by up to 20 mm, dialling the rod end position anywhere between 5 and 25 mm without changing parts.

This variant uses fluororubber (FKM) seals for enhanced thermal and oil resistance, expanding its suitability in harsher environments. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke25 mm
Adjustable range5 – 25 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×25Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 5 to 25 mm during machine changeovers to set new gripping depths without fabricating custom spacers.

vertical_align_center

Shallow Depth Pressing

Fit the compact riveted body into tight axial spaces to execute short, repeatable pressing strokes with a safe 241 N working load.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H the Right Cylinder?

When sizing this 32 mm bore actuator, evaluate your force requirements against its neighbours.

This model is specified with a 25 mm maximum stroke, a 20 mm adjust window, a PT1/8 port, and a female M6x1.0 rod-end thread. It lacks a piston magnet (-S), so it cannot support position sensing. Remember that the fixed bumper and mechanical stop do not hold the load if air pressure is lost; for load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–25 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H FAQ

At 0.7 MPa the push is 563 N and pull is 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.

The external M10x1.25 adjuster screw acts as a mechanical stop to shorten the extend stroke by up to 20 mm, giving a usable range of 5 to 25 mm. It does not alter the output force, and this specific SKU lacks a magnet for sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20H

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ32X25-20H and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.