
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The SDAJ32X25-20SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M10x1.25 adjuster screw lets you dial the outward stroke anywhere between 5 and 25 mm without swapping parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 rod thread. The short riveted body minimizes axial mounting depth in tight machinery. End shock is absorbed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 25 mm to clamp parts of varying thicknesses on a machining fixture without reprogramming pressure or swapping hardware.
Fine-tune the outward reach on packaging lines during format changes, using the M10x1.25 screw to set exact contact points for different carton sizes.
Safely test sensor landing depths in laboratory automation by adjusting the mechanical stop in small increments before finalizing a fixed cycle.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 5 to 25 mm extend window. Confirm the PT1/8 port, the 20 mm adjustment range, the male rod thread, and the integrated magnet. Note that a plain cylinder drifts when air is lost; the fixed bumper only decelerates near the end and the adjuster acts as a stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The M10x1.25 screw shortens the extend end position from the 25 mm maximum down to 5 mm. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.