
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X35-10SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X35-10SB is a compact double-acting double-rod cylinder built for tight axial mounting spaces, featuring a short riveted body that saves footprint depth where larger profile variants fail to fit. It integrates an external M10x1.25 adjustment screw (R thread) that lets you dial the extend stop directly on the machine between 25 and 35 mm, eliminating the need for shims or part swaps during changeovers.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, alongside a male-threaded M10x1.25 piston rod (-B) for secure external mounting. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X35-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 25 to 35 mm extend position during machine changeovers using the M10x1.25 screw, avoiding the downtime of physically swapping out cylinders for different part heights.
Utilize the male M10x1.25 rod end to secure custom alignment heads, setting a precise mechanical stop between 25 and 35 mm to press delicate components without overtravel.
Choose this adjusted-stop version if your application requires frequent trial positioning or on-site stroke tuning between 25 and 35 mm. Confirm your setup needs the male M10x1.25 rod thread (-B), the PT1/8 port, and the magnetic switch readiness (-S). Note that a plain cylinder does not hold a load when air is lost or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a pressure range of 0.15-1.0 MPa.
The external M10x1.25 adjuster screw shortens the extend stroke by up to 10 mm, allowing you to set the end position anywhere between 25 and 35 mm; the retract stroke remains full. The built-in magnet (-S) enables position sensing using AirTAC reed or electronic solid-state switches, and the -B code denotes the male M10x1.25 piston rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.