
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X40-20SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the forward end-position anywhere between 20 and 40 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M10x1.25 piston rod thread (-B) instead of the default female M6x1.0. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 40 mm via the M10x1.25 screw to accommodate varying part thicknesses on machining fixtures without swapping cylinders.
Iteratively set the exact 20-40 mm insertion depth for pins or bearings during prototype runs, relying on the fixed NBR bumper to absorb the final impact.
Confirm your requirements for the 40 mm maximum stroke, 20 mm adjust window, PT1/8 port, -S magnet, and -B male rod.
Remember that a standard cylinder does not hold a load if air pressure drops or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the stroke near its end and the M10x1.25 screw is a mechanical stop, neither acts as a brake. To maintain position without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The adjustable stop does not alter these force values.
Turning the external M10x1.25 R screw shortens the extend stroke by up to 20 mm, giving a usable range of 20-40 mm. This SB variant includes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.