
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X45-20SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. Its M10x1.25 adjuster screw lets you dial the outward stroke anywhere between 25 and 45 mm, eliminating the need for shims or part swaps during commissioning.
The short riveted body drastically reduces axial mounting depth where round-body or profile variants will not fit. This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, plus a male M10x1.25 rod-end thread. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the end of travel without acting as a lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 45 mm via the M10x1.25 screw to accommodate varying jig heights during production line changeovers.
When sizing this 32 mm bore, evaluate both adjacent options.
This model is specified for setups demanding frequent on-machine stroke tuning. It features a PT1/8 port, a 20 mm adjustment window, the -S magnet, and the -B male M10x1.25 rod. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the external R screw shortens the extend stroke by up to 20 mm, allowing any position between 25 and 45 mm. The included -S magnet enables position sensing using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.