
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-50SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X45-50SB is a compact double-acting double-rod cylinder built for tight axial mounting spaces, utilizing a short riveted body that saves depth where round-body alternatives fail. It features an external M10x1.25 R screw that lets you dial the extend stop directly on the machine, providing a usable extend range of 0-45 mm without swapping shims or parts.
This specific configuration includes a male M10x1.25 piston rod thread and a built-in magnet for AirTAC reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 45 mm |
| Adjustable range | 0 – 45 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Swap product families fast by turning the M10x1.25 adjuster screw to reposition the male rod end, saving axial depth in cramped cells.
Set precise push distances for different carton depths on the fly, relying on the fixed NBR bumper to absorb end-of-stroke shock.
Choose this unit when your fixture requires on-site stroke tuning, and confirm your specs: 32 mm bore, 45 mm nominal stroke, 50 mm adjust window, PT1/8 port, -S magnet, and -B male rod thread.
Keep in mind that a plain SDAJ does not hold position or carry a load if air pressure drops or the valve centers. The fixed NBR bumper only decelerates the stroke near its end and the R screw acts as a mechanical stop, not a lock. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The M10x1.25 R screw shortens the extend stroke by up to 50 mm, giving a usable 0-45 mm extend range. The -S code means a built-in piston magnet is included for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.