
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-10SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X50-10SB is a compact double-acting double-rod cylinder built for tight axial mounting spaces. A short riveted body saves footprint depth where larger profile alternatives fail to fit. It features an external M10x1.25 R adjuster screw, letting you dial the extend stop down from 50 mm to 40 mm directly on the machine without changing parts.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 rod end. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 50 mm |
| Adjustable range | 40 – 50 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 40-50 mm extend stop during fixture swaps to accommodate varying part heights without machining new spacers.
Use the built-in magnet and reed or electronic switches to verify mid-travel parts while micro-adjusting the end stop for trial setups.
When sizing this 32 mm bore, evaluate both neighbours for your payload.
Choose this model when your assembly requires on-site stroke tuning between 40 and 50 mm. Confirm your specifications: 32 mm bore, 50 mm maximum stroke, 10 mm adjust window, PT1/8 port, -S magnet for sensing, and -B male M10x1.25 rod thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
Turning the external M10x1.25 R screw shortens the extend stroke by up to 10 mm, allowing usable end positions between 40 and 50 mm without shims. The integrated -S piston magnet enables position detection using AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.