
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X55-20SB is a compact double-acting double-rod cylinder built for tight axial spaces. Its short riveted body saves mounting depth where longer profile or round-body units fail to fit. An external M10x1.25 adjuster screw lets you dial the extend stop directly on the machine between 35 and 55 mm without swapping shims or parts.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 rod thread. End shock is absorbed solely by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 55 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Thread the male M10x1.25 rod into a test jig and micro-adjust the end stop to find the exact contact point before finalizing a design.
Choose this unit when setups demand frequent on-machine stroke tuning between 35 and 55 mm. Confirm the 32 mm bore, 55 mm max stroke, 20 mm window, PT1/8 port, male M10x1.25 rod, and the -S magnet. Remember that a plain cylinder drifts on air loss or valve centering; the fixed bumper and mechanical stop never act as a lock. For suspended loads, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The M10x1.25 R screw shortens the extend end position by up to 20 mm, giving a usable stroke of 35 to 55 mm. The included -S magnet works with AirTAC reed or electronic switches for end-of-stroke sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.