
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-40SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X55-40SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in magnet (-S) is included for position sensing, and the rod end utilizes a male M10x1.25 thread (-B) instead of the default female thread. By turning the R (M10x1.25) adjuster screw, you can dial the extend position anywhere between 15 and 55 mm directly on the machine without swapping shims or parts.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 55 mm |
| Adjustable range | 15 – 55 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site during packaging line size changeovers, relying on the fixed NBR bumper to absorb the end shock for each new product length.
Fine-tune the extend endpoint in test assemblies to find the exact 20.5 kg vertical lift margin before locking down the final mechanical position.
Choose this specific model if your fixture requires on-site stroke tuning to accommodate multiple product formats without changing hardware.
Confirm the bore (32 mm), maximum stroke (55 mm), adjustment window (40 mm), and PT1/8 air port match your pneumatic layout. This unit includes the -S magnet for AirTAC reed or electronic switches and the -B male M10x1.25 piston rod. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw shortens the extend stroke by up to 40 mm, giving a usable extend range of 15 to 55 mm. The included -S magnet allows you to mount AirTAC reed or electronic solid-state switches directly into the body sensor grooves for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.