
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X60-20SB is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the R (M10x1.25) screw lets you dial the outward stroke down from the 60 mm maximum to 40 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 piston rod thread. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 60 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Set a precise mechanical stop for inserting pins or bearings, ensuring the male M10x1.25 rod bottoms out accurately every cycle.
Choose this configuration if your fixture requires on-site stroke tuning between 40 and 60 mm. Confirm your setup needs the male M10x1.25 rod end, the PT1/8 air port, and the -S magnet for switch sensing. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 563 N and the pull to 483.8 N. The theoretical maximum push force is 82 kgf at 1.0 MPa.
The external M10x1.25 R screw shortens the extend end position by up to 20 mm, allowing an adjustable window between 40 and 60 mm. The -S code denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.