
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X60-50SB is a compact double-acting double-rod cylinder featuring an external extend stop. A M10x1.25 adjuster screw lets you dial the outward stroke anywhere between 10 and 60 mm directly at the machine, eliminating the need for shims or part swaps during changeovers.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 piston rod thread. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 60 mm to match different jig heights during production line changeovers without swapping cylinders.
Use the M10x1.25 male rod and adjustable stop to safely probe trial positions on new assemblies before locking in a final fixed length.
Choose this specific model if your fixture requires frequent trial positioning or on-site stroke tuning across the 10 to 60 mm window.
Confirm your parameters: 32 mm bore, 60 mm maximum stroke, 50 mm adjustability, PT1/8 air port, male rod thread, and a magnetic piston. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 82 kgf at 1.0 MPa.
The external M10x1.25 screw shortens the extend stop by up to 50 mm, giving a usable range of 10 to 60 mm without altering the output force. The built-in magnet allows you to fit AirTAC reed or electronic solid-state switches directly into the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.