
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-10SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X65-10SB is a compact double-acting double-rod cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the extend position anywhere between 55 and 65 mm directly on the machine, eliminating the need for shims or part swaps during commissioning.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 rod end. The short riveted body conserves axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 65 mm |
| Adjustable range | 55 – 65 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 55-65 mm extend stop during quick tooling swaps, using the M10x1.25 screw to match new part heights without machining new spacers.
Set precise metal bend depths by tweaking the 10 mm adjustment window, ensuring the male M10x1.25 rod contacts the workpiece at the exact required point.
When sizing this 32 mm bore, evaluate both neighboring options. Choose this unit if your fixture requires on-site stroke tuning to hit a precise target.
Confirm the 65 mm maximum stroke, 10 mm adjustment window, and PT1/8 port. This specific SKU includes the -S magnet for position sensing and the -B male M10x1.25 piston rod. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a mid-stroke lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
At 0.7 MPa the push is 563 N and pull is 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.
The M10x1.25 R screw shortens the extend stroke by up to 10 mm, giving a usable range of 55-65 mm; retract remains full. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.