verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke65 mm
  • Adjustable range25–65 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$53.73 $61.23Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB

The AirTAC SDAJ32X65-40SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front R (M10x1.25) screw lets you dial the forward end-position between 25 and 65 mm directly on your machine, eliminating the need for shims or part swaps during changeovers.

This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M10x1.25). The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s across a 0.15-1.0 MPa pressure range.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke65 mm
Adjustable range25 – 65 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×65Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB Is Used

straighten

Trial Positioning Jigs

Dial the extend stop from 25 to 65 mm to find the exact 241 N safe contact point during prototype assembly runs before locking the M10x1.25 adjuster.

sync_alt

Quick Changeover Lines

Swap product formats rapidly by turning the R screw to shorten the forward stroke, leveraging the compact riveted body to fit tight tooling plates.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB the Right Cylinder?

When sizing this 32 mm bore, evaluate your force requirements bidirectionally.

This specific model is configured with the -S magnet for position sensing and the -B male M10x1.25 rod end. Confirm your porting matches the bore-fixed PT1/8 thread. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and the R screw is a stop, not a mid-stroke lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB FAQ

The theoretical maximum push force is 82 kgf at 1.0 MPa.

The M10x1.25 R screw shortens the extend stroke by up to 40 mm, allowing on-site tuning between 25 mm and 65 mm. The included -S magnet enables tracking by AirTAC reed or electronic switches along the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ32X65-40SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.