
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-40SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The SDAJ32X70-40SB is a compact double-acting double-rod cylinder featuring a male-thread M10x1.25 piston rod and a built-in magnet for position sensing. An external M10x1.25 adjuster screw lets you dial the extend stop anywhere between 30 and 70 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Its short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion. For reliable mid-stroke positioning feedback, the integrated magnet works seamlessly with AirTAC reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M10x1.25 adjuster screw during product changeovers to quickly reposition the extend endpoint, minimizing machine downtime between production runs.
Choose this specific model if your fixture requires on-site stroke tuning across a 30 to 70 mm extend window.
Confirm your parameters: 32 mm bore, 70 mm maximum stroke, 40 mm adjustability window, PT1/8 air port, male M10x1.25 rod thread, and an integrated magnet. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts, and the fixed bumper only decelerates near the stroke end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The M10x1.25 R screw shortens the extend stroke by up to 40 mm, allowing usable travel between 30 and 70 mm. The built-in magnet enables position detection using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.