
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X10-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 10 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X10-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you shorten the forward end position on-site across a 0 to 10 mm window, enabling precise dialling without shims or part swaps. Retract remains full, and the mechanism sets the mechanical stop without altering the pneumatic area.
The short riveted body saves axial mounting depth where round-body units will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke, rather than an adjustable air cushion. Note this SKU lacks a piston magnet, so magnetic sensing is not supported.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X10-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 10 mm |
| Adjustable range | 0 – 10 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×10 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the forward endpoint on packaging lines during format changes, using the R screw to tune the stroke without swapping hardware.
Choose this unit when your fixture requires exact 0 to 10 mm on-site stroke tuning.
Confirm the 40 mm bore, 10 mm stroke, 10 mm window, and PT1/8 port. The rod end thread is female M8x1.25 (male M14x1.5 optional with a B code). This base configuration has no magnet; add an S suffix for reed or electronic sensing. Remember that a plain cylinder drifts on air loss or valve centring—the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The R (M12x1.25) screw mechanically shortens the extend stop by up to 10 mm (usable range 0-10 mm) without changing the pneumatic force. It is a mechanical stop, not a mid-stroke lock. The cylinder does not hold position on air loss; use an external rod lock or pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.