
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R M12x1.25 screw, you can dial the forward stroke down by up to 40 mm directly on your machine, yielding a usable extend range of 60 to 100 mm without swapping shims or parts. Retract remains full, and the mechanical stop sets the end position without altering the pneumatic area.
The short riveted body saves valuable axial mounting depth where larger profile cylinders will not fit. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke end.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 60 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the R M12x1.25 screw to set the exact 60-100 mm extend stop for varying part widths, ensuring a precise 628.3 N clamping force at 0.5 MPa without part changes.
Adjust the extend position on the fly during line changeovers to route different package sizes, relying on the fixed NBR bumper to absorb the end shock at operating speeds.
Choose this model if your fixture requires frequent on-site stroke tuning during changeovers. Confirm your parameters: 40 mm bore, 100 mm max stroke, 40 mm adjust window, PT1/8 port, female M8x1.25 rod thread, and the -S magnet. Remember that a plain cylinder does not hold a load on air loss; the bumper only decelerates near the end. For vertical load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
This 40 mm bore double-acting cylinder pushes 628.3 N and pulls 527.8 N at 0.5 MPa. At 0.7 MPa it pushes 879.6 N. The theoretical maximum push is 128 kgf at 1.0 MPa. The air port is PT1/8.
Turning the external R M12x1.25 screw shortens the extend stroke by up to 40 mm, giving a usable forward range of 60 to 100 mm. The -S suffix means a built-in piston magnet is included for sensing position with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.