
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-20 is a double-acting compact cylinder featuring an external adjustable extend stop. An M12x1.25 adjuster screw lets you dial the forward end-position anywhere between 100 and 120 mm directly on the machine, avoiding part changes during setup.
Built with a short riveted body, this unit saves axial mounting depth where larger profile cylinders will not fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 100 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 100 to 120 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Fine-tune the downward travel in 1 mm increments via the M12x1.25 screw during initial commissioning to find the exact seating depth for a 32 kg assembly.
When sizing, compare this 40 mm bore against adjacent options.
Choose this model if your fixture requires exact forward positioning between 100 and 120 mm without mechanical shims. Confirm your porting is PT1/8 and the rod end is female M8x1.25. Remember that a plain cylinder drifts when air is lost or the valve centers; the bumper and mechanical stop do not lock the load. For vertical holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum is 128 kgf at 1.0 MPa.
Turning the external M12x1.25 screw shortens the extend stroke by up to 20 mm, giving a usable forward range of 100 to 120 mm. The retract stroke remains full length. This SKU lacks the -S magnet option and cannot support sensing switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.