
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-20B is a compact double-acting double-rod cylinder featuring an external extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke down by 20 mm, yielding a usable range of 110 to 130 mm directly on the machine without swapping shims or parts.
This variant uses a male-threaded M14x1.5 piston rod and lacks a piston magnet, meaning magnetic switches cannot be fitted to this specific SKU. The short riveted body minimizes axial mounting depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and the unit operates at speeds between 30 and 500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 110 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 110 to 130 mm to accommodate different part lengths on a machining line without fabricating new spacers.
Choose this specific model when your setup requires precise on-site tuning of the extend position within that 110 to 130 mm window.
Confirm the 40 mm bore, 130 mm maximum stroke, 20 mm adjustment window, and PT1/8 port match your pneumatic layout. This SKU includes the -B male M14x1.5 rod end and has no -S magnet, so position sensing is unavailable. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
The M12x1.25 screw mechanically shortens the extend stop by up to 20 mm, allowing an outward stroke between 110 and 130 mm. It is a stop only, not a mid-stroke lock; the cylinder cannot hold a load if air is lost without an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.