
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-30 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-30 is a double-acting compact cylinder featuring an external adjustable extend stop. A M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 100 and 130 mm directly on the machine, eliminating the need for shims or part swaps.
Housed in a short riveted body, this unit saves axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches; adding the -S option enables sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 100 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 100 and 130 mm to perfectly seat clamps on raw castings of varying widths without machining custom spacers.
When sizing this 40 mm bore, verify your force requirements against its neighbours.
Choose this model if your fixture requires frequent on-site stroke tuning within the 100-130 mm window. Confirm your porting matches the bore-fixed PT1/8 thread and that the female M8x1.25 rod-end fits your load. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates the stroke end and does not lock the load. For secure holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 30 mm, giving a usable range of 100 to 130 mm. The screw sets the mechanical stop and does not alter force. This specific SKU has no piston magnet, so it cannot use switches; you must select the -S option to enable reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.