
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-40 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-40 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the extend stroke down by up to 40 mm directly on the machine, yielding a usable range of 90 to 130 mm without swapping shims or parts. Retract remains full length.
The short riveted body drastically saves axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. This specific SKU ships without a piston magnet, so it cannot host reed or electronic switches; order the -S variant if sensing is required.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 90 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for machining fixtures needing exact clamp depth. Dial the 90-130 mm extend stop to dial in part contact without machining custom spacers.
Ideal for packaging lines with rapid format changes. Turn the M12x1.25 screw to reposition a diverter gate for varying carton lengths on the fly.
Useful for vertical lift stations where the exact raise height is determined empirically. Set the stop precisely to avoid over-traveling into upper tooling.
Choose this unit if your assembly requires frequent on-machine stroke tuning between 90 and 130 mm. Confirm your parameters: 40 mm bore, 130 mm max stroke, 40 mm window, PT1/8 port, female M8x1.25 rod thread, and no magnet.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred. The fixed NBR bumper only decelerates the stroke end, and the R screw acts as a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
The external R (M12x1.25) screw mechanically limits the extend stroke, allowing you to shorten it from the 130 mm maximum down to 90 mm. It sets the stop position without altering the output force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.