
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-20S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X25-20S is a compact double-acting double-rod cylinder built for tight axial spaces. Its short riveted body saves mounting depth where round-body or profile units will not fit. An external R (M12x1.25) adjuster screw lets you dial the extend stop on-site between 5 and 25 mm without shims or part changes. Retract remains full length.
End shock is handled by a fixed NBR bumper that decelerates the stroke, though it is not an adjustable air cushion. The -S code indicates a built-in piston magnet for AirTAC reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for setup-heavy lines where the extend stop must be tuned repeatedly between 5 and 25 mm during initial commissioning.
Swap product formats quickly by turning the M12x1.25 screw to reposition the 628.3 N extend endpoint without changing hardware.
Perfect for test fixtures needing incremental reach adjustments, relying on the fixed NBR bumper to absorb end shock.
Size both ways against this 40 mm bore. Choose this specific unit if your machine commissioning requires precise trial positioning of the extend endpoint.
Confirm the 40 mm bore, 25 mm stroke, and 20 mm window suit your motion path. This configuration uses a PT1/8 port, a 16 mm rod, and a female M8x1.25 rod-end thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The R (M12x1.25) screw shortens the extend stop by up to 20 mm, giving a usable 5 to 25 mm range. The -S code adds a built-in piston magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.