
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X35-20S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop from 15 to 35 mm directly on your machine. Retract travel stays at the full 35 mm regardless of the extend setting.
Its short riveted body drastically reduces axial mounting depth, fitting where larger profile cylinders cannot. The unit includes a fixed NBR bumper at each end to decelerate the stroke, and the built-in piston magnet (-S) supports AirTAC reed or electronic switches for end-of-stroke confirmation. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 15-35 mm extend stop during tooling changeovers to clamp raw billets of varying widths without re-engineering the fixture.
Set a precise lower limit for inserting pins, using the fixed NBR bumper to absorb the end shock while the magnet confirms the stroke end.
Choose this specific model if your fixture requires on-site extend tuning between 15 and 35 mm to accommodate part variance without swapping components.
Confirm your parameters: 40 mm bore, 35 mm max stroke, 20 mm adjust window, PT1/8 port, and a female M8x1.25 rod thread. The -S code indicates the internal magnet is present for sensing. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centres; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
At 0.5 MPa, push force is 628.3 N and pull force is 527.8 N. At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum push force is 128 kgf at 1.0 MPa.
The M12x1.25 R screw mechanically shortens the extend stroke by up to 20 mm, allowing usable travel between 15 and 35 mm without shims. The built-in magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.