
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X45-30SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that lets you dial the extend stop directly on the machine between 15 and 45 mm. This thin riveted body saves valuable axial mounting depth where larger profile or round-body units cannot fit.
This specific configuration includes a male M14x1.5 piston rod thread and a built-in magnet for position sensing. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. The rod travels at speeds between 30 and 500 mm/s, operating reliably across a temperature range of -20 to +70 C.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 45 mm |
| Adjustable range | 15 – 45 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Trial-position the male M14x1.5 rod end against different carton profiles, fine-tuning the 30 mm window on-site to prevent crushing while maintaining a 32 kg vertical lift margin.
Set precise insertion depths for bearing presses, relying on the fixed NBR bumper to absorb the end shock as the compact riveted body fits into shallow machine cavities.
Choose this 40 mm bore if your application demands that specific force threshold within a tight footprint.
This model is ideal for operators who require frequent on-machine stroke tuning during product changeovers. Confirm your installation parameters: 40 mm bore, 45 mm maximum stroke with a 30 mm adjust window, PT1/8 air port, a male M14x1.5 rod thread, and an integrated magnet for AirTAC reed or electronic switches. Remember that a plain cylinder does not hold position if air pressure drops or the valve is centered; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds from 30 to 500 mm/s.
The external M12x1.25 adjuster screw shortens the extend stroke by up to 30 mm, allowing you to set the stop anywhere between 15 and 45 mm. The included -S magnet enables position detection using either AirTAC reed or electronic solid-state switches. The adjuster acts only as a mechanical stop and does not function as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.