verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke50 mm
  • Adjustable range40–50 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$50.68 $58.18Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10

The AirTAC SDAJ40X50-10 is a double-acting compact cylinder featuring a 40 mm bore and a 50 mm maximum stroke. An external M12x1.25 adjustment screw lets you dial the extend end-position down to 40 mm directly on the machine, providing a 10 mm tuning window without changing parts.

The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; for position sensing you would need the -S variant.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke50 mm
Adjustable range40 – 50 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×50Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10 Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop 40-50 mm during fixture swaps to accommodate varying part heights without machining new spacers.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10 the Right Cylinder?

Confirm your bore, 50 mm stroke, 10 mm window, PT1/8 port, female rod thread, and lack of magnet for this build.

Remember that a plain double-acting cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift, as the fixed bumper only decelerates near the end of travel and the M12x1.25 screw acts as a stop, not a brake. To maintain vertical position without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.

AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10 FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

Turning the external M12x1.25 screw mechanically shortens the extend end-position from the 50 mm maximum down to 40 mm. This adjustment sets the stop without changing the force, and it does not lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ40X50-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.