
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X55-10S is a compact double-acting double-rod cylinder featuring an on-site extend stop. A side-mounted M12x1.25 adjuster screw lets you dial the outward travel down from the 55 mm maximum to a 45 mm minimum, providing a 10 mm tuning window without swapping shims or parts.
This thin riveted-body design drastically reduces axial mounting depth, fitting where longer profile or round-body units cannot. The bore is hard-anodized and relies on a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. Equipped with a built-in piston magnet, the unit supports AirTAC reed or electronic solid-state switches for precise end-position detection.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 55 mm during machine setup to seat new grippers perfectly without machining new spacers.
Stepping down to an SDAJ32 yields 402.1 N, whereas stepping up to an SDAJ50 provides 981.7 N. Choose this unit when your fixture requires exact 45-55 mm extend tweaking during changeovers.
Confirm the 40 mm bore, 55 mm stroke, 10 mm window, and PT1/8 port match your manifold. The -S code indicates the internal magnet is present for switch mounting, and the rod end utilizes a female M8x1.25 thread. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper and mechanical stop do not lock the load, so add an external rod lock or pilot-operated check valve for holding requirements.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The M12x1.25 screw mechanically shortens the extend end position between 45 and 55 mm without altering thrust. The included -S magnet enables tracking by AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.