
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-50 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X55-50 is a double-acting compact cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop directly on your machine. You can set the outward stroke anywhere from 5 to 55 mm without swapping shims or parts, while the retract motion remains full length.
A short riveted body minimizes axial mounting depth where round-body or profile units will not fit. End-of-travel shock is handled by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; choose the -S option if sensing is required.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 55 mm |
| Adjustable range | 5 – 55 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 5-55 mm extend stop during tooling changeovers to clamp raw castings securely without machining custom spacers.
Set precise upper travel limits for elevating 32 kg fixtures, using the external screw to prevent overshoot while gravity assists retract.
Choose this adjustable model for setup-heavy lines requiring frequent changeovers or trial positioning.
Confirm your parameters: 40 mm bore, 55 mm maximum stroke, 50 mm adjust window, and a PT1/8 air port. The rod end thread is female M8x1.25 (or male M14x1.5 on the -B variant) on a 16 mm rod. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred, as the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
Operating pressure spans 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
Turning the R (M12x1.25) screw shortens the extend end position by up to 50 mm, yielding a usable outward range of 5 to 55 mm; the retract stroke remains full. This SKU has no piston magnet, so it cannot accept magnetic switches. You must select the -S variant to use AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.