
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-10S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
Its short riveted body saves mounting depth where a larger profile body will not fit. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches.
An external M12x1.25 adjuster screw lets you dial the extend stop between 50 and 60 mm directly on the machine, eliminating shims or part changes during commissioning. The adjuster sets the mechanical stop without altering the bore area, so force remains identical to a standard SDA. End shock is managed by a fixed NBR bumper that decelerates the stroke, rather than an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 50-60 mm extend stop during fixture swaps to accommodate varying part thicknesses without machining new spacers.
Lift loads up to 32 kg safely and fine-tune the upper stop position to prevent overshoot in tight vertical lifting stations.
Choose this specific model if your fixture requires on-site extend tuning across a 50-60 mm window. Confirm your porting matches the bore-fixed PT1/8 thread, and note the -S magnet and female M8x1.25 rod-end thread. Because a standard cylinder drifts when air is lost, add an external rod lock or pilot-operated check valve if you need true load holding.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend end-position by up to 10 mm, yielding a usable 50-60 mm stroke. The built-in -S magnet works with AirTAC reed or electronic switches for end-of-stroke sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.