
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-30SB is a compact double-acting double-rod cylinder featuring an external extend stop. A built-in piston magnet and male M14x1.5 rod thread come standard on this variant. Turning the M12x1.25 adjuster screw lets you dial the extend end-position anywhere between 40 and 70 mm directly on the machine, avoiding part swaps during setup.
The short riveted body minimizes axial mounting depth where space is tight, while a fixed NBR bumper decelerates the stroke end. This bumper is not an adjustable air cushion, so external shock absorbers are advised for high-energy cycles.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 40 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 70 mm during die swaps, letting one cylinder adapt to multiple part heights without machining new spacers.
Safely set the mechanical stop for a 32 kg vertical lift, using the male M14x1.5 rod to secure the load bracket precisely where needed.
When sizing this 40 mm bore, evaluate both neighboring options.
Choose this specific configuration when your fixture requires frequent on-site stroke tuning across a 40-70 mm window. It includes the -S magnet for AirTAC reed or electronic switches and the -B male M14x1.5 piston rod. Note that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your porting matches the PT1/8 air connection.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend stroke by up to 30 mm, giving a usable range of 40-70 mm without changing force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.