
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-50S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-50S is a compact double-acting double-rod cylinder featuring an external extend stop. A M12x1.25 adjustment screw lets you dial the outward stroke anywhere between 20 and 70 mm directly at the machine, eliminating the need for shims or part swaps during changeovers.
Its short riveted body significantly reduces axial mounting depth where a larger profile cylinder will not fit. The unit relies on a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion, and the included -S piston magnet supports AirTAC reed or electronic solid-state switches for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 70 mm to clamp parts of varying heights without swapping out the entire actuator body on the machining fixture.
Set precise lower limits for lifting tasks up to 32 kg, knowing the fixed NBR bumper will decelerate the load safely at the adjusted end position.
This model is ideal for operators who need frequent on-site stroke tuning to accommodate varying material thicknesses.
Remember that a plain compact cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift and the bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This configuration includes a PT1/8 port, a 16 mm rod, a female M8x1.25 rod-end thread, and the -S magnet for switch readiness.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend stroke by up to 50 mm, giving a usable outward range of 20 to 70 mm. The -S option denotes a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.