verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke75 mm
  • Adjustable range45–75 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$76.73 $84.23Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH

The AirTAC SDAJ40X75-30SH is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M12x1.25) screw lets you dial the outward stroke down by up to 30 mm, yielding a usable extend range of 45 to 75 mm directly on the machine without shims or part changes.

This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and fluororubber (FKM) seals (-H) for enhanced thermal and oil resistance. The short riveted body saves axial mounting depth where larger profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke75 mm
Adjustable range45 – 75 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×75Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH Is Used

precision_manufacturing

Machining Clamp Tuning

Dial the 45-75 mm extend stop to seat raw castings precisely against a fixture stop without machining custom spacers.

science

High-Temp Test Ejector

Utilize the FKM seals to withstand heated environments while positioning test samples accurately within the 30 mm adjustment window.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH the Right Cylinder?

Choose this unit if your fixture requires frequent on-site stroke tuning or changeovers.

Confirm your parameters: 40 mm bore, 75 mm max stroke, 30 mm adjust window, PT1/8 port, female M8x1.25 rod thread, plus the -S magnet and -H FKM seals. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

The M12x1.25 adjuster screw shortens the extend stroke by up to 30 mm, giving a 45-75 mm range. The built-in magnet (-S) works with AirTAC reed or electronic switches for position sensing, while the FKM (-H) seals handle higher temperatures.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ40X75-30SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.