
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-10S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X80-10S is a compact double-acting double-rod cylinder featuring an external R (M12x1.25) adjustment screw. Turning this screw lets you dial the extend end-position down by 10 mm on the machine, yielding a usable extend range of 70 to 80 mm without changing parts. Retract remains full length. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.
End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. The built-in piston magnet (-S) supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 70-80 mm extend stop on the R screw during first-article runs to set the exact clamp depth on raw castings without machining new spacers.
Choose this model if your fixture requires on-site stroke tuning during changeovers.
Confirm the bore (40 mm), maximum stroke (80 mm), adjustment window (10 mm), and PT1/8 port. This configuration includes the -S magnet for sensing and a female rod-end thread (M8x1.25). Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The M12x1.25 adjuster screw mechanically shortens the extend stroke by up to 10 mm, giving a 70-80 mm range. It does not alter force or lock mid-stroke. The -S option adds a piston magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.