
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 75 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X85-10SB is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where round-body units fail. An external R (M12x1.25) adjustment screw lets you dial the extend stop directly on the machine between 75 and 85 mm, eliminating the need for shims or part swaps during fine-tuning.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M14x1.5 piston rod thread (-B) for secure external mounting. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 85 mm |
| Adjustable range | 75 – 85 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly retune the male M14x1.5 rod extension by up to 10 mm when switching conveyor product families, ensuring precise 32 kg vertical lifts maintain alignment.
Adjust the mechanical end-stop on-site to accommodate varying box depths while the fixed NBR bumper reliably decelerates the 40 mm piston at cycle completion.
Choose this model if your setup-heavy line requires on-site stroke tuning across its 75-85 mm window. Verify your spec needs for bore, stroke, window, PT1/8 port, the -S magnet, and the -B male M14x1.5 rod thread.
Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred—the piston drifts, as the fixed NBR bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. If your application demands high cycling energy, add an external shock absorber to protect the bumper.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.