
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-30S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M12x1.25 adjustment screw modifies the forward stop from 60 to 90 mm, letting you dial in the exact endpoint during machine commissioning without swapping shims or parts. Retract travel remains full length.
This riveted-body design saves substantial axial mounting depth compared to conventional round-body or profile alternatives, fitting easily into space-constrained assemblies. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston near the endpoints; it is not an adjustable air cushion. The built-in piston magnet (-S option) supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 60-90 mm extend stop on the fly to accommodate raw material thickness variations, ensuring a precise 628.3 N clamping force at 0.5 MPa without reprogramming the motion controller.
Adjust the mechanical stop during size changeovers to fold varying box heights accurately, relying on the fixed NBR bumper to absorb the end-of-stroke impact safely.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 60-90 mm extend band.
Confirm the 40 mm bore, 90 mm maximum stroke, 30 mm adjust window, PT1/8 port, and the female M8x1.25 rod-end thread suit your mounting plate. The included -S magnet enables switch sensing, while the male M14x1.5 thread is an alternative if specified. Remember that a plain compact cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum push force is 128 kgf at 1.0 MPa.
The M12x1.25 adjuster screw shortens the extend stroke by up to 30 mm, allowing an adjustable range of 60 to 90 mm without changing parts. The -S option includes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.