
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 100 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X110-10 is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can shorten the forward stroke on-site, dialling the end position anywhere between 100 and 110 mm without changing parts. The short riveted body saves axial mounting depth where a longer profile cylinder will not fit.
End shock is handled by a fixed NBR bumper that decelerates the stroke, though it is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 110 mm |
| Adjustable range | 100 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 100-110 mm extend stop during press fit commissioning to achieve precise insertion depths without swapping mechanical spacers.
Fine-tune the forward reach of a transfer arm on the machine to accommodate slight variations in product dimensions on the fly.
This model is ideal for setups requiring on-site stroke tuning within the 10 mm window. Confirm your bore, 110 mm maximum stroke, 10 mm adjustability, PT1/4 port, and female M10x1.5 rod-end thread. Note that a plain cylinder does not hold its load on air loss or valve centring; for a held load, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
At 0.7 MPa, push is 1374.4 N and pull is 1154.5 N. The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the external R (M16x1.5) screw mechanically shortens the extend stop, allowing the rod end position to be set anywhere between 100 and 110 mm. The retract stroke remains full, and the screw functions only as a stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.