
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 100 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X110-10S is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that lets you dial the extend stop from 100 to 110 mm directly on the machine. The short riveted body drastically saves axial mounting depth where a larger profile cylinder will not fit.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-travel shock is managed by a fixed NBR bumper that decelerates the piston near the end of the stroke; it is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 110 mm |
| Adjustable range | 100 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 100-110 mm extend stop during tooling changeovers to precisely set forming depth without machining new spacers.
Adjust the mechanical stop on the fly to accommodate varying carton depths on a packaging line, ensuring consistent fold pressure.
Choose this 50 mm bore if your application requires that mid-level thrust plus on-site extend tuning.
The 10 mm adjustable window is ideal for final positioning tweaks during machine commissioning. Confirm your requirements for the PT1/4 port, the female M10x1.5 rod-end thread, and the 20 mm piston rod. Note that a plain cylinder does not hold a load if air pressure drops or the valve is centered; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
At 0.5 MPa, push force is 981.7 N and pull force is 824.7 N. At 0.7 MPa, push is 1374.4 N and pull is 1154.5 N. The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 adjuster screw shortens the extend stroke by up to 10 mm, giving a usable range of 100-110 mm; retract remains full. The built-in magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.