
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-30 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X110-30 is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop directly on your equipment. You can tune the forward stroke anywhere between 80 and 110 mm without swapping shims or parts, making it highly effective for frequent format changeovers. Retract travel remains full length.
The short body design saves valuable axial mounting depth where larger profile cylinders will not fit. End shock is managed by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 110 mm |
| Adjustable range | 80 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 110 mm during product changeovers to accommodate different material thicknesses without changing hardware.
Set precise lifting heights for multi-level conveyor transitions, relying on the fixed NBR bumper to absorb the impact of the 50 kg payload.
Choose this specific unit if your assembly requires on-site stroke tuning between 80 and 110 mm.
Confirm your parameters: 50 mm bore, 110 mm max stroke, 30 mm window, PT1/4 port, female M10x1.5 rod thread, and no magnet. Because this SKU lacks the -S option, it cannot accept reed or electronic switches. Note that a plain cylinder does not hold position on air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the external M16x1.5 screw shortens the extend end position from the 110 mm maximum down to 80 mm. The screw acts only as a mechanical stop and does not alter the force. It is not a lock; the cylinder will drift on air loss, so use a pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.