
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X110-40B is a double-acting compact cylinder featuring an external M16x1.5 R-thread adjuster screw. This mechanism lets you dial the extend end-position down by up to 40 mm, yielding a usable forward travel range of 70 to 110 mm directly on the machine without swapping shims or parts. Retract remains full length, and the adjuster strictly sets the mechanical stop without altering pneumatic area.
The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. This specific SKU includes a male-thread M18x1.5 piston rod and lacks a piston magnet, meaning it cannot accept reed or electronic switches without changing to an -S variant. End deceleration relies on a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 110 mm |
| Adjustable range | 70 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Tune the stroke on-site to deflect packages of different sizes without repositioning the cylinder mount, relying on the fixed NBR bumper to absorb the stop shock.
Choose this model if your fixture requires frequent changeovers or trial positioning that demands on-site stroke tuning.
Confirm the bore (50 mm), maximum stroke (110 mm), adjustment window (40 mm), and PT1/4 port. This SKU carries the -B option for a male M18x1.5 rod end, so ensure your mating fixture accommodates external threads. Note that a plain cylinder does not hold its load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the M16x1.5 R screw shortens the extend stop by up to 40 mm, giving a usable forward range of 70 to 110 mm. The screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss, and this non-S SKU cannot take a magnetic switch.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.