
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-50 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X110-50 is a compact double-acting double-rod cylinder built for on-site extend tuning. An external M16x1.5 adjustment screw lets you shorten the outward stop anywhere between 60 and 110 mm, eliminating the need for shims or part swaps during changeovers.
The short riveted body conserves axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and the PT1/4 port supplies air across a 30-500 mm/s speed range. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 110 mm |
| Adjustable range | 60 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 60 to 110 mm to accommodate varying raw stock thicknesses on a fixture without machining new spacers.
Fine-tune the push rod end position on the fly during format changeovers, ensuring crisp folds for different box heights.
Choose this 50 mm bore when your application demands that middle ground of force.
This model is ideal for lines requiring frequent trial positioning or setup adjustments without changing hardware. Remember that a plain cylinder does not hold position on air loss or valve centred; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 110 mm stroke, 50 mm window, PT1/4 port, female rod thread, and lack of magnet (S) for your build.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend stroke by up to 50 mm, yielding a usable 60-110 mm range. This SKU has no magnet and cannot take switches; the -S variant adds a magnet for reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.