verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke110 mm
  • Adjustable range35–110 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$94.88 $102.38Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75

The AirTAC SDAJ50X110-75 is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A built-in M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 35 and 110 mm, eliminating the need for shims or part swaps during machine commissioning.

Designed to save axial mounting depth, the short riveted body fits where larger profile cylinders cannot. The bore is hard-anodized and uses a fixed NBR bumper at each end to decelerate the stroke, though this is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa across a 30-500 mm/s speed range.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke110 mm
Adjustable range35 – 110 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×110Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75 Is Used

precision_manufacturing

Machining Clamps

Dial the extend stop between 35 and 110 mm to secure parts of varying widths against a fixture without machining custom spacers.

vertical_align_center

Vertical Lift Stops

Set a mechanical limit for a 50 kg lift application, relying on the M16x1.5 screw to define the exact lower position.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75 the Right Cylinder?

Choose this specific model if your fixture requires frequent changeovers or trial positioning within its 35 to 110 mm forward travel. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This SKU lacks a magnet for sensing, the port is PT1/4, and the rod end features a female M10x1.5 thread.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–110 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75 FAQ

The theoretical maximum push is 200 kgf at 1.0 MPa.

Turning the external M16x1.5 screw shortens the forward stroke by up to 75 mm, giving a usable extend range of 35 to 110 mm. The retract stroke remains full. This SKU has no magnet (-S) and cannot take a switch.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X110-75 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.