Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B
The AirTAC Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
- BoreØ50 mm
- Max stroke110 mm
- Adjustable range35–110 mm
- Adjuster threadM16×1.5
- Port sizePT1/4
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B
The AirTAC SDAJ50X110-75B is a compact double-acting cylinder featuring an external M16x1.5 adjustment screw that lets you dial the extend stop anywhere between 35 and 110 mm directly on your machine. Because the adjuster sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this bore, giving you about 981.7 N of push at 0.5 MPa. This specific SKU uses a male M18x1.5 piston rod thread for straightforward external mounting.
Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, fitting into tight machine footprints. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning the stop absorbs shock but does not act as a mid-stroke lock or brake. Note that this base configuration lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B Technical Specifications
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B Is Used
Machining Center Clamps
Dial the 35-110 mm extend stop to secure raw castings of varying widths, using the 981.7 N push force to hold parts firmly against the locator without reprogramming the PLC.
Variable-Depth Carton Sealing
Adjust the male M18x1.5 rod extension on the fly to match different box heights, letting the fixed NBR bumper absorb the repetitive end-of-stroke shock during high-speed sealing cycles.
Tiered Palletizing Stops
Set precise mechanical lower limits for multi-layer pallet builds, relying on the compact riveted body to fit within narrow gantry clearances where space is at a premium.
Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B the Right Cylinder?
When sizing this 50 mm bore, look both directions: stepping down to the SDAJ40 yields 628.3 N of push at 0.5 MPa, while stepping up to the SDAJ63 provides 1558.6 N. This SDAJ50X110-75B sits comfortably in the middle, delivering a safe working load of roughly 589 N (about 60 percent of its 981.7 N capacity) and a vertical lift capability near 50 kg with a 2:1 safety margin. Choose this model if your fixture design requires frequent on-site stroke tuning to accommodate varying part heights without swapping components.
Verify your setup requires the 110 mm maximum extend and the 75 mm adjustable window, along with the PT1/4 air port. Since this SKU includes the -B option, ensure your tooling mates with the male M18x1.5 rod end and that side loading is minimized. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel. For strict load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 35–110 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M16×1.5 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B FAQ
This 50 mm bore double-acting cylinder delivers 981.7 N push and 824.7 N pull at 0.5 MPa, 1374.4 N push and 1154.5 N pull at 0.7 MPa, with a theoretical maximum of 200 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
Turning the external M16x1.5 screw mechanically shortens the extend stroke by up to 75 mm, giving a usable range of 35 to 110 mm without altering the output force. This specific -B configuration lacks a piston magnet, so it cannot accept AirTAC reed or electronic switches; you would need the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-75B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.