
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 110 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X120-10 is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 110 to 120 mm. Its short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.
A fixed NBR bumper at each end decelerates the piston near the stroke limits, operating effectively between 30 and 500 mm/s. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; adding the -S option enables sensing capabilities.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 120 mm |
| Adjustable range | 110 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend position on the fly for varying carton sizes on a sorting line without changing cylinder hardware or disassembling the assembly.
Choose the 50 mm bore when the smaller unit lacks thrust and the larger variant is physically too wide.
Operators needing on-site stroke tuning for frequent product changeovers will benefit from the 10 mm extend window. Note that a plain SDAJ does not hold position on air loss or valve centring; the fixed bumper only decelerates the end of travel and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your requirements for bore, 120 mm stroke, 10 mm window, PT1/4 port, female M10x1.5 rod thread, and no magnet.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 R screw shortens the extend end position between 110 and 120 mm. The screw acts purely as a mechanical stop and does not alter force. The cylinder cannot hold a load on air loss; use an external rod lock or pilot-operated check valve for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.