
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-30B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X120-30B is a compact double-acting double-rod cylinder built for applications requiring a precise extend endpoint. An external M16x1.5 adjustment screw lets you shorten the forward stroke by up to 30 mm, providing an on-machine usable range of 90 to 120 mm without changing parts.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. This specific SKU features a male M18x1.5 piston rod thread and uses a PT1/4 air port. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and this base model ships without a piston magnet, meaning it cannot directly host magnetic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 120 mm |
| Adjustable range | 90 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the extend endpoint within the 30 mm window to accommodate different carton depths on a packaging line, relying on the fixed NBR bumper to absorb end shock.
When sizing this unit, evaluate your force requirements against its neighbours. Choose this adjustable variant if your assembly process demands frequent on-machine stroke tuning or trial positioning. Confirm your parameters: 50 mm bore, 120 mm max stroke, 30 mm adjust window, PT1/4 port, male M18x1.5 rod (-B), and no magnet. Note that a plain SDAJ does not hold position on air loss; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The external M16x1.5 screw acts as a mechanical stop that shortens the extend stroke by up to 30 mm, yielding a usable 90-120 mm forward range without impacting force. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.