
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X120-50 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw. Turning this R thread lets you dial the extend stop anywhere between 70 and 120 mm directly on your machine, eliminating the need for shims or part swaps during changeovers. Retract remains a full 120 mm.
Built with a short riveted body, this unit saves axial mounting depth where round-body or larger profile variants will not fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, and the PT1/4 port pairs with a 20 mm piston rod to handle demanding cycles.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 120 mm |
| Adjustable range | 70 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 to 120 mm to secure raw castings of varying widths in a milling vise without machining custom spacers.
Fine-tune the push height on the fly during format changeovers, using the full 981.7 N at 0.5 MPa to erect heavy corrugated board.
Stepping down to the SDAJ40 yields 628.3 N, whereas moving up to the SDAJ63 provides 1558.6 N.
Choose this specific 50 mm bore if your fixture requires on-site stroke tuning across a 70 to 120 mm window. It features a female M10x1.5 rod-end thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches without specifying the -S option. Remember that a plain cylinder does not hold position on air loss or valve centring; the fixed bumper merely decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The external M16x1.5 screw acts as a mechanical stop, shortening the extend stroke anywhere between 70 and 120 mm. It does not alter the output force, and the fixed NBR bumper only decelerates the end of travel rather than locking the load mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.