verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 120 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke120 mm
  • Adjustable range70–120 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$101.65 $109.15Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B

The AirTAC SDAJ50X120-50B is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop anywhere between 70 and 120 mm. This thin riveted-body design saves axial mounting depth where round-body or profile cylinders cannot fit.

This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. The screw functions strictly as a position stop, not a mid-stroke lock, so external measures are required for load holding.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke120 mm
Adjustable range70 – 120 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×120Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B Is Used

conveyor_belt

Variable-Length Diverters

Fine-tune the actuator reach on packaging lines during product changeover, using the male M18x1.5 rod to mount custom tooling.

vertical_align_center

Vertical Lift Stops

Set precise upper travel limits for 50 kg vertical lifts, ensuring the fixed NBR bumper safely decelerates the load at the end of motion.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B the Right Cylinder?

When sizing this unit, evaluate your thrust requirements against its neighbours.

Choose this configuration if your machine requires frequent on-site stroke tuning across a 70 to 120 mm window. Verify your setup needs the male M18x1.5 rod end and the PT1/4 air port. Remember that a plain double-acting cylinder drifts when air is lost or the valve centres; the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 70–120 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B FAQ

The air port is PT1/4.

Turning the external M16x1.5 screw shortens the extend stroke by up to 50 mm, allowing on-machine tuning between 70 and 120 mm. This mechanism is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-50B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X120-50B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.