
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 120 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X130-10 is a double-acting compact cylinder featuring an external M16x1.5 R screw that lets you dial the extend stop directly on the machine between 120 and 130 mm.
Its short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit. The unit relies on a fixed NBR bumper to decelerate the stroke end and operates within a 30-500 mm/s speed range. Note that this specific SKU lacks a piston magnet, so it cannot accommodate reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 130 mm |
| Adjustable range | 120 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the final 120-130 mm extend stop during initial tooling setup to precisely strike a part without fabricating custom spacer shims.
Lift approximately 50 kg payloads, relying on the fixed NBR bumper to absorb end-of-stroke shock while adjusting the final 10 mm of travel.
This 50 mm bore, 130 mm maximum stroke, 10 mm window model uses a PT1/4 port and a female M10x1.5 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; the bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa and runs at speeds of 30-500 mm/s.
The external M16x1.5 screw shortens the extend stroke by up to 10 mm, yielding a usable 120-130 mm range without changing parts. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches; you must select the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.