
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 120 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X130-10B is a double-acting compact cylinder featuring an external adjustable extend stop. A simple turn of the R (M16x1.5) screw lets you dial the outward stroke on the machine, shortening the end position anywhere between 120 and 130 mm without swapping shims or components.
This variant utilizes a male-threaded M18x1.5 piston rod end to secure your tooling. The short riveted body conserves valuable axial mounting depth in tight machinery envelopes. End-of-travel shock is managed strictly by a fixed NBR bumper, which decelerates the piston near the end of the stroke but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 130 mm |
| Adjustable range | 120 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 120 to 130 mm clamping depth on machining fixtures using the R screw, accommodating varying part tolerances without fabricating new spacer blocks.
When sizing this unit, evaluate your force requirements against its neighbors. It is the correct choice for setups demanding on-site stroke tuning within a 120 to 130 mm window.
Confirm your build needs the -B male M18x1.5 rod thread, the 10 mm adjustment window, and the PT1/4 air port. Remember that a plain SDAJ does not hold position or carry a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. If your cycle speeds generate excessive end energy, add an external shock absorber since the standard NBR bumper is fixed.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
This 50 mm bore cylinder features a PT1/4 air port. The theoretical maximum push force is 200 kgf at 1.0 MPa.
Turning the M16x1.5 adjuster screw shortens the extend stroke by up to 10 mm, providing a usable outward range of 120 to 130 mm. This SKU lacks a built-in magnet, so it cannot support reed or electronic switches; you would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.