
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X15-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X15-10S is a double-acting compact cylinder featuring an on-site adjustable extend stop. An external M16x1.5 screw lets you dial the outward stroke anywhere from 5 to 15 mm without swapping shims or parts, streamlining machine commissioning. The retract motion remains at the full length.
This 50 mm bore actuator uses a short riveted body to minimize axial mounting depth where space is tight. It carries a built-in piston magnet for direct mounting of AirTAC reed or electronic switches. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X15-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly adjust the outward endpoint on the machine during product changeovers, saving setup time by turning the M16x1.5 screw instead of changing hardware.
Sizing this actuator requires comparing neighbouring bores.
Select the SDAJ50X15-10S specifically for trial positioning or frequent changeovers where the extend endpoint must be fine-tuned on the machine. Confirm the 15 mm maximum stroke, 10 mm adjust window, PT1/4 port, and the -S magnet. The male M18x1.5 rod end (or female M10x1.5) handles the 20 mm rod. Remember that a plain cylinder does not hold its load on air loss or valve centering; the fixed bumper only decelerates near the end. For a locked position without live pressure, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 adjuster screw shortens the extend stroke by up to 10 mm, giving a usable 5-15 mm range. The -S suffix means a built-in magnet is included for position sensing with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.