
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X15-20B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X15-20B is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a male M18x1.5 threaded piston rod. A short riveted body minimizes mounting depth where larger profile bodies cannot fit.
An external M16x1.5 adjuster screw lets you dial the extend stop down to 0 mm directly on the machine, shortening the nominal 15 mm stroke by up to 20 mm without changing parts. End shock is handled by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without the -S option.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X15-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 15 mm |
| Adjustable range | 0 – 15 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M16x1.5 screw to fine-tune the extend endpoint on the fly during prototype line setups, avoiding part swaps.
Choose this 50 mm bore when you need substantial force in a shallow footprint.
This model is ideal for setups requiring frequent on-site stroke tuning to dial in exact contact points. Note that a plain cylinder does not hold its load if air is lost or the valve is centered; the piston drifts, and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Configuration: 50 mm bore, 15 mm stroke, 20 mm window, PT1/4 port, male M18x1.5 rod (-B), no magnet.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 adjuster screw mechanically shortens the extend stop by up to 20 mm, allowing the 15 mm stroke to be dialed down to 0 mm on-site. It sets the stop position without changing the force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.